Transform Your 4th Gen Tacoma with Morimoto XB EVO Dual DRL Headlights
The 2024+ Toyota Tacoma introduced an entirely new look for Toyota’s midsize truck, but there’s still plenty of room to upgrade its lighting performance and give the front end a more distinctive appearance. The Morimoto XB EVO Dual DRL Headlights combine advanced LED optics, customizable lighting functions, and a direct-fit design to create a premium headlight upgrade specifically for the 4th Gen Tacoma.
Designed for all 2024-current Toyota Tacoma models, the XB EVO headlights feature Bi-LED projectors, side-specific Torus optics, selectable white or amber daytime running lights, configurable turn signals, heated Frost-Free lenses, and an animated welcome sequence. They’re also designed to connect to the factory harness and mounting locations, giving Tacoma owners a major lighting upgrade without sacrificing the clean integration expected from a modern truck.
A Complete Headlight Upgrade for the 4th Gen Tacoma

Replacing the headlights is one of the most noticeable changes you can make to the front of a 4th Gen Tacoma.
Morimoto designed the XB EVO specifically around the newest generation, allowing the housings to complement the Tacoma’s aggressive factory styling while introducing an entirely different internal lighting design.
The result is an upgrade that changes more than appearance. The XB EVO system is engineered to improve usable nighttime illumination through a combination of dedicated projectors, supplemental optics, and high-beam reflectors.
Whether your Tacoma is primarily a daily driver or regularly heads out on nighttime adventures, these headlights bring additional lighting technology to the front of the truck.
Advanced Bi-LED Projector Optics

The centerpiece of each XB EVO headlight is a Type 1 Ishida Bi-LED projector.
Morimoto pairs that projector with two side-specific Torus optics designed to supplement the low beam and create a wider distribution of light. Each assembly also incorporates two dedicated high-beam reflectors.
The Torus optics are specific to the driver and passenger sides rather than using an identical universal design for both housings. Combined with the main projector, the system is designed to create a bright, wide low beam with controlled light distribution.
For drivers who spend significant time traveling after dark, better optics can be one of the most meaningful upgrades you make to the truck.
DOT-Compliant Street Performance

More output isn’t useful if the light isn’t properly controlled.
The standard XB EVO configuration is designed to meet DOT and FMVSS108 requirements, giving Tacoma owners a lighting upgrade engineered for street use.
Morimoto also designed the optical system to meet IIHS headlight standards.
That combination of output and beam control is important. Rather than simply producing more raw light, the XB EVO optics are designed to put that light where it’s useful.
The headlights also provide vertical adjustment of approximately +/- 6 degrees, allowing proper aiming after installation.
Choose White or Amber DRLs

One of the standout features of the XB EVO Dual DRL headlights is the ability to customize their appearance.
Morimoto’s Signal Swap system lets you select either full-time white or full-time amber daytime running lights.
That means you’re not permanently committed to one look when you purchase the headlights.
Choose white for a cleaner, modern OEM-inspired appearance, or switch to amber for a more aggressive look that pairs especially well with other amber lighting on an off-road Tacoma build.
Both settings operate at full DRL brightness.
Sequential or Fade-Off Turn Signals

Customization continues with the turn signals.
Using the plug-and-play mode selectors on the rear of the headlights, you can configure the turn signals for either a sequential animation or a standard signal with a fade-off effect.
Sequential signals provide a more animated appearance, while the standard configuration keeps things closer to a traditional turn signal.
It’s another small detail that allows you to personalize the headlights around the overall style of your Tacoma.
Animated Welcome Sequence

The XB EVO headlights don’t simply turn on.
Morimoto incorporates an animated welcome sequence that activates during startup, giving the Tacoma a premium lighting animation every time you approach or start the truck.
On a modern vehicle like the 4th Gen Tacoma, details like this help the aftermarket headlights feel integrated with the rest of the vehicle rather than functioning as a basic replacement housing.
Combined with the customizable DRLs and turn signals, the welcome sequence makes the XB EVO one of the most visually distinctive lighting upgrades available for the newest Tacoma.
Frost-Free Heated Lenses

LED headlights produce less forward heat than traditional halogen lighting, which can become a disadvantage during snowy and icy conditions.
Morimoto addresses that problem with its Frost-Free lens heating system.
When temperatures drop below approximately 41°F, the system can be activated by flashing the Tacoma’s high beams four times. An integrated heater then warms the lens to help prevent frost accumulation and maintain useful light output in freezing conditions.
For Tacoma owners who regularly travel through snow, winter storms, or freezing mountain conditions, this is a particularly useful feature.
Plug-and-Play Factory Integration

Despite the technology packed inside the housings, Morimoto designed the XB EVO headlights to integrate with the factory Tacoma electrical system.
The headlights bolt into the factory mounting locations and connect to the factory harness.
The system is designed to operate without dash errors, flickering, or radio interference, helping maintain the polished feel you’d expect from a premium lighting upgrade.
The complete kit includes the driver and passenger headlights along with the required power harness, DRL relay, fuse tap, input adapters, resistors, and mode-selection components.
Optional Supercharged LED Drivers

For Tacoma owners who want even more lighting performance for off-road use, Morimoto offers an optional Supercharged LED driver upgrade.
The Supercharged system increases both low- and high-beam output by approximately 30%.
That additional performance can be useful on trails, desert roads, or other situations where maximum nighttime visibility is the priority.
There is an important distinction, however: installing the Supercharged drivers pushes the headlights beyond their street-legal configuration. Morimoto specifies the Supercharged setup for off-road use, while the standard XB EVO configuration is the appropriate choice for street-driven trucks.
Built for Long-Term Clarity

A premium headlight needs to continue looking and performing properly after years of exposure to sunlight and weather.
The XB EVO uses anti-UV hard-coated lenses designed to resist the deterioration and clouding that can affect lower-quality aftermarket headlights over time.
That construction is particularly valuable on trucks that spend their lives outdoors, where the headlights are constantly exposed to sunlight, temperature changes, dirt, snow, rain, and trail conditions.
Combined with Morimoto’s internal components and optical engineering, the housings are designed as a long-term upgrade rather than simply a cosmetic replacement.
Perfect for a Complete 4th Gen Tacoma Lighting Build

The XB EVO Dual DRL headlights can also become the centerpiece of a larger Tacoma lighting setup.
Depending on how you use your truck, you could pair them with:
- LED fog lights
- Ditch lights
- Grille lighting
- Fang lights
- Amber marker lights
- Off-road light bars
- Bed and camp lighting
- Rear-facing scene lights
For a street-driven Tacoma, the headlights and fog lights may provide everything you need. For an off-road build, additional auxiliary lighting can be added for situations where street-legal headlight output isn’t the limiting factor.
Building each lighting system around a specific purpose creates a more useful setup than simply adding as many lights as possible.
Modernize Your Tacoma Without Losing Its Identity

The 4th Gen Tacoma already has one of the most aggressive front-end designs Toyota has put on its midsize truck.
The XB EVO doesn’t try to hide that design.
Instead, the housings build on the Tacoma’s existing styling with sharper lighting elements and customizable DRLs that give the truck a more distinctive appearance without making the front end feel disconnected from the rest of the vehicle.
Whether you choose white DRLs for a clean OEM-plus build or amber DRLs for a more trail-focused look, the headlights can complement a wide range of Tacoma styles.
Backed by a Five-Year Warranty

Morimoto backs the XB EVO headlights with a five-year warranty.
That’s particularly important with a sophisticated headlight assembly containing projectors, LEDs, DRLs, turn signals, heating elements, and electronic controls.
For Tacoma owners investing in a premium headlight upgrade, warranty coverage adds additional confidence that the system is designed to remain part of the truck for years rather than simply looking good when first installed.
Final Thoughts
The Morimoto XB EVO Dual DRL Headlights for the 2024+ Toyota Tacoma combine serious lighting performance with some of the most customizable styling available for the 4th Gen.
Morimoto’s Type 1 Ishida Bi-LED projectors, side-specific Torus optics, dedicated high-beam reflectors, selectable white or amber DRLs, sequential or fade-off turn signals, animated welcome sequence, and Frost-Free heated lenses create a headlight system that’s about much more than changing the Tacoma’s appearance.
Installation is designed around the factory mounting points and electrical system, the standard configuration is DOT/FMVSS108 compliant, and an optional Supercharged driver provides approximately 30% additional low- and high-beam output for off-road applications.
If you’re looking for a headlight upgrade that can completely change the look of your 2024+ Tacoma while also improving nighttime lighting performance, the Morimoto XB EVO Dual DRL Headlights are a strong addition to any street, trail, or overland-focused 4th Gen build.
Leave a comment