Torq Front Leveling Spacer For Tacoma (2005-Current)
1TORQ Engineering - Toyota Tacoma 2" Front Leveling Kit
Gen 2: 2005–2015 | Gen 3: 2016-2023 | Gen 4: 2024+
2" Lift | CNC Machined 6061-T6 Aluminum | Made in the USA
Level the Tacoma. Keep the Factory Suspension.
Precision-machined billet aluminum front spacers add approximately 2" of front lift for a cleaner stance and additional tire clearance while retaining your factory shocks and springs.
✓ CNC-Machined 6061-T6 Billet Aluminum
✓ Factory Struts & Springs Retained
✓ Spring Compressor Required
✓ Designed • Machined • Built in Utah
A SIMPLE SOLUTION TO FACTORY RAKE
More Stance. More Clearance. No Suspension Replacement.
Tacomas leave the factory with noticeable front-to-rear rake. The TORQ 2" Front Leveling Kit raises the front approximately 2", creating a more balanced stance while retaining the suspension components Toyota engineered for the truck.
|
BETTER STANCE
|
|
|
|
|
TORQ vs the alternatives
| Budget Spacer | TORQ 2" Level | Full Suspension | |
|---|---|---|---|
| Levels Front Stance | ✓ | ✓ | ✓ |
| Retains Factory Shocks | Usually | Yes | No |
| CNC Billet Components | Varies | Yes | Varies |
| Installation Complexity | Low | Low | Higher |
| Changes Damping | No | No | Yes |
| Best For | Lowest-cost lift | Premium OEM+ level | Suspension-performance builds |
WHEEL & TIRE FITMENT GUIDE
How Big of a Tire Can I Run?
A TORQ 2" front level gives your Tacoma the stance and clearance to run a larger tire without replacing the factory suspension.
For most owners, the decision comes down to this:
Choose your wheel size, pick how aggressive you want to go, and use the recommended tire size below.
17" WHEELS
| Tire Size | Approx. Diameter | Fitment | Best For |
|---|---|---|---|
| 265/70R17 | 31.6" | 🟢 EASY FIT | Simple, conservative upgrade |
| 275/70R17 | 32.2" | 🟢 EASY FIT | Bigger stance with minimal fitment concerns |
| 285/70R17 | 32.7" | ⭐ SWEET SPOT | Our favorite 33" combination |
| 285/75R17 | 33.8" | 🟡 AGGRESSIVE | Maximum-size builds where wheel specs and clearance matter |
Our 17" Recommendation
285/70R17
If you want the classic leveled Tacoma look, this is the size we would start with.
You get:
-
Nearly 33" overall diameter
-
Noticeably fuller wheel wells
-
More sidewall for trail use
-
Aggressive stance without jumping straight into a heavily modified setup
18" WHEELS
| Tire Size | Approx. Diameter | Fitment | Best For |
|---|---|---|---|
| 265/65R18 | 31.6" | 🟢 EASY FIT | Factory-like ride and appearance |
| 275/65R18 | 32.1" | 🟢 EASY FIT | Larger tire without going too aggressive |
| 285/65R18 | 32.6" | ⭐ SWEET SPOT | Our favorite 18" combination |
| 285/70R18 | 33.7" | 🟡 AGGRESSIVE | Near-34" setup where clearance becomes more important |
Our 18" Recommendation
285/65R18
This is essentially the 18" equivalent of a 285/70R17.
It gives you:
-
Nearly 33" overall diameter
-
Wider, more planted stance
-
Clean OEM+ appearance
-
Plenty of tire without overwhelming the truck
NOT SURE WHICH TO CHOOSE?
Choose 17" Wheels If You Want:
More sidewall • More off-road capability • Classic Tacoma look
Our Pick:
285/70R17
Choose 18" Wheels If You Want:
More wheel • Slightly sportier appearance • OEM+ street/trail balance
Our Pick:
285/65R18
THE EASY ANSWER
If you want a larger tire without turning your Tacoma into a fitment project:
17" Wheel
Go with a 285/70R17
18" Wheel
Go with a 285/65R18
Both are approximately 33" tall and give a leveled Tacoma the fuller, more proportional stance most owners are looking for.
WHEEL OFFSET MATTERS
Tire size is only half of the equation.
Wheel width and offset determine where the tire sits inside the wheel opening and can dramatically affect rubbing and clearance.
For best results, avoid choosing an extremely low or negative offset simply to push the wheels farther outside the fenders.
A properly selected wheel keeps the tire positioned where the Tacoma has the most usable clearance.
General Wheel Guidance
2005–2023 Tacoma
17x8–8.5 or 18x8–8.5
Moderate positive to near-zero offset
2024+ Tacoma
17x8–8.5 or 18x8–8.5
Approximately +18mm to +25mm offset is a strong starting point.
WANT TO PUSH IT FURTHER?
Larger combinations such as:
285/75R17
or
285/70R18
can work on properly configured Tacomas, but we consider these aggressive fitments.
At this size, clearance becomes more dependent on:
-
Wheel offset
-
Wheel width
-
Tire manufacturer
-
Alignment and caster
-
Vehicle trim
-
Suspension travel
-
Inner liner and mud-flap clearance
If your goal is a straightforward installation with minimal fitment concerns, we recommend staying with the 285/70R17 or 285/65R18 sweet spot.
FITMENT NOTE
Actual tire dimensions vary between manufacturers and tire models. Two tires marked with the same size may have slightly different overall diameters and section widths.
Always verify clearance at full steering lock and throughout suspension travel after installing oversized wheels and tires.
What's included / installation
WHAT'S INCLUDED
Pair of TORQ front billet spacers
Required installation hardware
Installation instructions
Bolt-On Installation
The TORQ leveling spacer integrates with the factory strut assembly, allowing you to retain the original Toyota shocks and springs.
- Retains factory shocks and springs
- No cutting or welding required
- Spring compressor required
- Professional installation recommended if you're not experienced with strut disassembly
- Alignment recommended after installation